Plastic injection, foundry, stamping — rigid, precise machines for machining complex shapes.
The real constraints you face every day — and how our machines meet them.
Surface finishes of Ra 0.2-0.4 µm on cavities. Smooth 3D contouring with no tool marks. Surface quality determines mould quality.
Pre-hardened steels 40-55 HRC, tool steels, cast irons. The machine must absorb cutting forces without vibrating.
Mouldmakers are always behind schedule. Every hour saved on machining the mould is an hour saved on delivery to the customer.
Moulds can weigh several tonnes and measure over a metre. They require long travels and a high table load capacity.
A selection based on the requirements of your sector. The first range is our main recommendation; each model links to its full technical data sheet.
Box-way architecture for vibration damping when machining hard materials. Repeatability ±0.002 mm. Service life of 20 years minimum.
Symmetrical double-column design for large moulds. Long travels up to 6,000×2,600 mm. High-load table for heavy parts.
Simultaneous 5-axis machining for complex cavities in a single set-up. 18,000 rpm HSK-A63 spindle. Siemens SINUMERIK ONE.
The figures that directly affect your cost per part and your quality.
The questions manufacturers in your sector ask us most often.
Ask a technician a questionMould dimensions, material, tolerances, surface finish — tell us what you need.
